TopTape

From - DaTong Tech

 

 

 

Distributor

3M Tape : 

  3M Adhesive Tape

  3M Electrical Tape

  3M Double Sided Tape

  3M Adhesive Transfer Tape

  3M VHB Tape

  3M Masking Tape

  3M Adhesive

  3M Abrasive

  3M Mask

Other Brand Tape :

  Nitto Tape

  Permacel Tape

  Tesa Tape

  VST Tape

DaTong Adhesive Tape :

  High Temperature Tape

  Acrylic Foam Tape

  Adhesive Transfer Tape

  Splicing Tape

  Skip-Slit Tape

  Transparent Bumper

  PTFE Film

 

 

 

 

 

3M Flexographic Mounting Tapes

 

3M Flexographic Mounting Tapes

Easy on, easy off… providing a wide choice of adhesive formulations, foam densities, and tape thickness for the results your customers demand.


3M Flexographic Mounting Tapes - Product Selector

Mounting Tips - proper surface preparation is important
Prevent air bubbles with the Easy Mount Liner from 3M

Cushion Mount
Cushion Mount Plus
Cylinder Build Up
Solid Printing Tapes

3M E1020H, 3M E1015H ;

 

Product Selection Guide: Wide Web & Label Printing  
 
Product Features Plate Types Printing Type Features
Product
Number
Tape
Thickness
Inch (mm)
Description Rubber Photopolymer Solids Combination Process
Flexomount™ Solid Printing Tapes
411DL 0.015"
(0.38)
Gray double coated tape with a soft rubber adhesive on each side of a vinyl carrier. Available in single and double liner.
  • Gray vinyl products with a high adhesion.
  • Helps reduce edge lifting.
  • Helps minimize pin holing on solid work.
412DL 0.020"
(0.50)
447DL 0.010"
(0.25)
413DL 0.015"
(0.38)
Black double coated tape with a firm rubber adhesive on each side of a vinyl carrier. Available in single and double liner.
  • Black vinyl - lower adhesion.
  • Higher temp and solvent resistance.
  • Helps minimize pin holing on solids.
414DL 0.020"
(0.50)
Cushion-Mount™ Solid Printing Tapes
929 0.060"
(1.52)*
Rubber adhesive on each side of a high density elastomeric foam.
  • Highest density 3M™ Cushion-Mount™ products.
  • Use for solid and bold line work.
  • Helps reduce cylinder bounce at higher speeds.
933 0.015"
(0.38)*
939 0.020"
(0.50)*
949 0.020"
(0.50)*
Differential adhesive system on a high density elastomeric foam. Non-liner side: rubber resin adhesive. Liner side: acrylic adhesive.
Cushion-Mount™ Plus Firm Combination Printing Tapes
1815M 0.015"
(0.38)*
Different acrylate adhesive system on each side of a foam carrier, protected by a paper release liner on one side.
  • Better solid ink density than the standard combination printing tapes.
  • Clean removal from plate and print cylinder.
1820M 0.020"
(0.50)*
Cushion-Mount™ Plus Standard Combination Printing Tapes
1015/1015M 0.015"
(0.38)*
Differential acrylate adhesive sustem on a medium density polyethylene foam.

M products for use on photopolymer plates where lower adhesion is preferred.
  • Most versatile 3M Cushion-Mount™ Products
  • Effectively prints most types of flexographic printing from highlights and mid tones through solid work.
  • M products provide lower adhesion to plate side.
1020/1020M 0.020"
(0.50)*
1020R 0.020"
(0.50)*
1040 0.040"
(1.02)*
1060 0.060"
(1.52)*
Cushion-Mount™ Plus Soft Combination Printing Tapes
1915M 0.015"
(0.38)*
Differential acrylate adhesive system on each side of a foam carrier, protected by a paper release liner on one side.
  • Better tone reproduction than the standard combination printing tapes.
  • Clean removal from plate and print cylinder.
1920M 0.020"
(0.50)*
Cushion-Mount™ Plus Process Printing Tapes
1115 0.015"
(0.38)*
Differential acrylate adhesive system on a low density polyethylene foam.

K product for use mounting photopolymer plates to fiberglass or composite sleeves only.
  • Can be used for high quality process work and screen printing.
  • K product mounts plates to fiberglass or composite sleeves.
1120 0.020"
(0.50)*
1120K 0.020"
(0.50)*



3M Repulpable Tapes 


This totally repulpable tape line (paper tapes that can be recycled to the process without contamination of the broke pulp) for use in paper mills, converters, newspapers and web printers for roll closing/tabbing and splicing. 


Permanent Double Coated 
Designed primarily for finished mil overlap splicing paper. A light-weight tissue coated on both sides with a high shear firm adhesive.

Double Coated Splicing Tape 405 
Excellent for raw and starch-treated papers.

Double Coated Splicing Tape 900 
Recommended for LWC papers. 

Sheeter Tape 9974 
Recommended for uncoated, newsprint and most coated papers.


Temporary Double Coated 
A paper tape with high tack, repulpable adhesive on a repulpable kraft paper easy release liner, roll to roll transfers, core starting and other web processing applications. 

Heavy Duty Repulpable Double Coated Tape 9022 
Heavy tissue, very high tack for core starting.

Double Coated Flying Paster For Newsprint 913 
Designed for newspaper splicing and can be used in conjunction with 9030 nose tabs.

Double Coated Flying Splicing Tape High Strength 9977 
Reinforced tissue, strongest flying splice tape for heavy papers and easy tear back.

Double Coated Splicing Tape 9069 
Excellent for newsprint or directory stock.

Double Coated Web Splicing Tape 9038 
General purpose plus flying splice for the commercial printers and corrugators.

Flying Splice Tape 905 
Primarily designed for low temperature flying and zero speed splicing of most paper types where a thin caliper is required. Can also be used for core starting. Fiber-reinforced adhesive transfer tape.

Flying Splice Tape 906 
Primarily designed for high temperature flying splices at the Off-Machine Coater. A light-weight tissue coated on both sides with a high tack, high shear strength, repulpable adhesive.

Web Processing Double Coated Tape R3227 
R3227 is a light-weight tissue coated on both sides with a new technology high tack, high shear strength, repulpable adhesive, used for core starting, roll closing and temporary splicing applications.

Permanent Single Coated 
Repulpable tapes designed for butt splicing, add leading and trailing cover tapes in permanent finish mill splicing applications.

Single Coated Splicing Tape 9103 
Printable, coatable backing.

Single Coated Splicing Tape 901 
Excellent for raw and starch-treated papers.

Single Coated Splicing Tape 910 
Recommended for coated and uncoated papers and paperboard. 

Single Coated Splicing Tape 9960 
Thinnest butt splicing tape for lightweight uncoated, coated, and super calendared papers.

Thin Printable Repulpable Single Coated Splicing Tape 9969 
Very thin butt splicing/cover tape for uncoated, newsprint and most coated papers


Temporary Single Coated 
Primarily designed for general purpose tabbing and butt splicing of temporary applications; medium shear. A semi-bleached kraft paper coated with a high tack transparent repulpable adhesive. 

Single Coated Splicing Tape 902 
General purpose, low shear.

 Super Strength Single Coated Repulpable Tape 917 
General purpose, strong repulpable backing.


3M 9359, 3M 9996


DaTong Technology Corp. China

Tel:86-512- 6725 4825 ; Fax: ---- 4835

datong3@163.com

 

3M Tape Homepage